|
|
 |

- Last Review: March
18, 2010
Compatibility List
Before you
look at the list, please try the program with your switch.
Managed Switches not on this list will usually work with
our software if the switch is SNMPv1/v2c enabled and you have the
correct read privileges community name.
The chart below shows a list of switches
that have been tested with our software. If your switch does not
appear here, that only means we have not tested it or a user has
not reported test results to us. Feel free to
report your test results to us here.
Please try this program with your switch even if your switch
is not on this list.
This list is under construction and
will include more switches as they are reported to us.
Report your results here.
Chart Legend: "Yes, fully
tested in-house" means we have personally tested it ourselves, "Yes"
or "No" means a customer reported the test results to us.
| Manufacturer |
Model |
Compatibility |
| 3COM |
SS II 1100 |
Yes |
| 3COM |
SS II 3300 |
Yes |
| 3COM |
SS II 3900 |
Yes |
| 3COM |
4050 |
Yes |
| 3COM |
SS 3 4400 |
Yes |
| 3COM |
SuperStack 3 4500 |
Yes, fully tested in-house |
| 3COM |
4924 |
Yes |
| Allied Telesyn |
AT-GS950/24 |
No, user had latest firmware as of 3-18-10, but a
full dump showed bridge mib did not seem to be fully
populated. |
| Cisco |
Catalyst 2950 |
Yes, fully tested in-house |
| Cisco |
Catalyst 2960G |
Yes |
| Cisco |
25xx |
Yes |
| Cisco |
3650 |
Yes |
| Cisco |
4006 |
Yes |
| Cisco |
4500 Series |
Yes |
| Cisco |
4506 |
Yes |
| Cisco |
4948 |
Yes |
| Cisco |
6000/6509 Series |
Yes, but may require changes to access permissions and
SNMP settings. |
| Cisco |
3500XL |
Yes |
| Cisco |
3550 Series |
Yes |
| Cisco |
3560 |
Yes |
| Dell |
2748 |
No, switch does not support SNMP |
| Dell |
2808 |
Yes |
| Dell |
3224 |
Yes |
| Dell |
3248 |
Yes |
| Dell |
3324 |
Yes, requires switch firmware version 1.2.0.6 or newer |
| Dell |
3348 |
Yes, requires switch firmware version 1.2.0.6 or newer.
Fully tested in-house |
| Dell |
3448 |
Yes, requires switch firmware version 1.0.1.13 or newer |
| Dell |
5224 |
Yes |
| Dell |
5324 |
Yes |
| Dell |
6024F |
Yes |
| Dell |
6248 |
Yes, duplex info is not available |
| D-Link |
DES-3526 |
Yes, fully tested in-house |
| Enterasys SecureStack |
A-series, B-series and C-series |
Yes |
| Extreme Networks |
Summit48si |
Yes, you will need do this command line first:
enable snmp add dot1dTpFdbTable |
| HP |
Procurve 2524 |
Yes, fully tested in-house |
| HP |
Procurve 3200 |
Yes |
| HP |
4000M |
Yes |
| LinkSys |
SRW224G4 |
Yes, fully tested in-house |
| Netgear |
FSM7328PS |
Yes, fully tested in-house |
| Netgear |
FS750T2 |
No, switch firmware does not support mapping as of
Aug 10, 2009. |
| Netgear |
GSM7224R |
Yes, fully tested in-house |
| Netgear |
GSM7328S |
Yes, fully tested in-house |
| Netgear |
GS748TR |
Yes, fully tested in-house |
| Nortel |
BES 100-24T |
Yes, fully tested in-house |
| Nortel |
8610 |
Yes |
The manufacturer/model names of the switches are
trademarks of their respective companies. |
 |
|